Gallery
Video
Play Video
Gallery
Toro Greensmaster® TriFlex™ 3400
Toro Greens Mowers For Sale
The all new Greensmaster® TriFlex™ mowers were designed to take precision cutting to a completely new level
Key Features
- ENGINE: Kubota® D902, Tier 4i, 24.8 HP (18.5 kW) @ 3600 rpm
- Height: 80.83” (205 cm)
- WEIGHT: 1286 lbs. (586 kg)
Contact
Semco
Description
The all new Greensmaster® TriFlex™ mowers were designed to take precision cutting to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the new TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.
ENGINE | Kubota® D902, Tier 4i, 24.8 HP (18.5 kW) @ 3600 rpm, 3-cylinder, liquid cooled, diesel engine, governed to 2880 high idle, 1560 rpm low idle. Displacement: 55.0 cu-in. (902 cc) Radiator: cooled with a 12-volt electric fan |
FUEL CAPACITY | 6 gallons (22.7 liter) capacity. Biodiesel ready up to B20 |
TRACTION DRIVE | 2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
GROUND SPEED | Forward-mowing speed is variable from 0-5 mph (0-8 km/h), adjusted by stop on pedal mechanism. Mow speed setting does not affect transport speed. Maximum Greensmaster TriFlex transport speed is 10 mph (16.1 km/h), may be reduced by adjusting stop in footrest pan without affecting mow speeds. |
CUTTING UNIT DRIVE | Single gear pump, valve block, series reel drive to 3 reel motors. |
AUTOMATIC CLIP CONTROL | N/A |
STEERING | Power steering. No-tool quick adjust steering arm position with power assist, allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
ELECTRICAL SYSTEM | Maintenance-free 12-volt battery with 585 minimum cold cranking amps at 0° F (-17.7° C) and 95 minutes minimum reserve capacity at 85° F (29.4° C) 60 amp alternator, circuit fused at 60 amps. Ignition switch/key. Seat switch. High temperature engine shut down. Harness terminals, fuse slot, and console switch location available for optional lights installation. |
48-VOLT SYSTEM FOR ELECTRIC REELS | N/A |
CONTROLS | Ignition: Off/Run/Start. Throttle: Low – High Idle. Choke (AC only): Open /Closes choke plate. Parking Brake: Off – On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues (04510 & 04520). InfoCenterTM Diagnostics (04530 & 04540). |
GAUGES | Hour meter, low oil pressure warning light, alternator warning light (on if not charging), glow plug indicator, high engine temperature. |
TIRES/WHEELS/PRESSURE | Three, 19 x 10.5 x 8, 4-ply rating pneumatic tubeless and demountable. Smooth tread. Tire pressure recommended: 12 – 18 psi front and rear. |
BRAKES | Hand-actuated parking brake lever with two 6” (15.2 cm) diameter drum brakes mounted on the front wheel motors. |
HYDRAULIC OIL | 6.8 gallon (25.7 liter) tank |
LEAK DETECTION | Optional |
SOUND LEVEL | 84 dB(A) at operator’s ear under normal conditions. |
OVERALL DIMENSIONS | Wheel Track: 50.5” (128.3 cm) Wheel Base: 48.6” (123 cm) Length: 98” (249 cm) Width: 70.62” (179 cm) w/reels Height: 80.83” (205 cm) |
WEIGHT | 1286 lbs. (586 kg) |
WIDTH OF CUT | 59″ (150 cm) |
GROUND CLEARANCE | 4.5” (11.4 cm) |
CUTTING UNIT SUSPENSION | Double A-arm suspension utilizing sealed ball joints allows free cutting unit motion in pitch, roll, and yaw. The basket is directly mounted to the cutting unit displacing weight evenly over both cutting unit rollers eliminating the carrier frame, roller and pull links. Lift in Turn: Provides a level cut from side to side of cutting units regardless of turning angle (patented). |
QUICK CONNECT CUTTING UNITS | Quick connect/disconnect feature for both the reel drive motor and cutting unit. No tools required. |
REEL SPEED | Approximately 2050 RPM at 2850 engine RPM. Adjustable. |
BACKLAPPING | Standard equipment |
OPTIONAL ACCESSORIES | Canopy, verticutters, greens rollers, dethatchers, oil cooler. |
CERTIFICATION | Certified to meet ANSI specification B71.4 – 2004 and European CE standards. |
WARRANTY | Two-year limited warranty. Refer to the Operator’s Manual for further details. |
Technical Specifications
Brand
Toro
Model
Greensmaster® TriFlex™ 3400
Industry
Lawn Care
Type
Commercial Mower
ENGINE
Kubota® D902, Tier 4i, 24.8 HP (18.5 kW) @ 3600 rpm
Height
80.83” (205 cm)
WEIGHT
1286 lbs. (586 kg)
Similar Machines
$9,899 AUD ex GST