Gallery
Video
Play Video
Gallery

Toro ProCore® 648s Series Turf Aerator

The ProCore 648s builds on the tremendous legacy of the ProCore 648 by incorporating proven technology and even more innovative features while preserving the time tested design elements that changed the way you aerate.
Key Features
Contact

Semco

Description
The ProCore 648s builds on the tremendous legacy of the ProCore 648 by incorporating proven technology and even more innovative features while preserving the time tested design elements that changed the way you aerate. Revised controls improve ergonomics and allow single handed operation. Hole spacing and true tine depth are now set and saved in the InfoCenter. The onboard controller is continuously monitoring key operating parameters to improve after aeration turf condition and allow the operator to easily target coring head drop and raise. A tighter turning radius with reduced wheel scrubbing and the ability to easily increase speed during turns increases productivity. Proven reliability,improved performance and exciting innovation – that’s what makes the ProCore 648s the new superior choice.
ENGINE Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air filter. External spin-on oil filter, 2-quart (1.9-liter).
FUEL CAPACITY 7.5 gallons (28.4 liter), gasoline.
ELECTRICAL 12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amps @ 0°F. Micro-processor logic control
DRIVETRAIN Series-Parallel, closed loop, hydrostatic drive. 3WD, except it automatically switches to 2WD while in aeration mode and traveling in forward direction with coring head raised allowing a tighter turning radius. Electronically controlled variable displacement piston type pump. High-torque, low-speed wheel motor drive.
HYDRAULIC SYSTEM Remote spin-on filter. 3.0- gallon (13.2 liter) capacity, Toro PX Extended Life hydraulic fluid.
CONSTRUCTION Welded steel frame with cast crank and arm assembly.
TIRES 20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.
BRAKES Dynamic braking through hydrostatic transmission. Parking brake actuated when steering handle is raised into storage position.
GROUND SPEED Transport Mode: Forward: 0-4.5 mph (0-7.2 km/h), variable ,Reverse: 0-2.0 mph (0-3.2 km/h), variable Aeration Mode: Forward: 0-2.5 mph (0-4.0 km/h), variable, Reverse: 0-2.0 mph (0-3.2 km/h), variable Aeration Forward Spacing: 1-4.5” (2.5-11.3 cm) in 0.25” (5mm) increments 1” (2.5 cm) spacing: 0.51 mph (0.8 km/h 2” (5.0 cm) spacing: 1.03 mph (1.65 km/h) 3” (7.5 cm) spacing: 1.54 mph (2.46 km/h) 4” (10.0 cm) spacing: 2.06 mph (3.30 km/h)  
INSTRUMENTATION InfoCenter™, tachometer
CONTROLS Redundant operator presence bails, aeration start/stop bails and traction speed thumb wheels on handle. Tine length calibration, tine depth and forward hole spacing set and saved in InfoCenter. Bump stop, delayed or immediate drop switch, cruise control on/set/off switch, aerate or transport switch and optional LED light kit switch located on operator console. Ignition, tachometer on side console. Throttle and choke on engine.
INTERLOCKS Operator presence, clutch latch, traction neutral, coring head raise/lower
DIMENSIONS Length: Handle Down: 116.3” (293.1 cm); Handle Raised: 91.8” (231.3 cm) Width: 50.12” (127.3 cm Height: Head Raised 45” (114.3 cm) ; Head Lowered 36.5″ (92.7 cm); Handle Raised: 60.7” (153.0 cm); Handle Lowered: 47.5” (119.7 cm) Wheelbase: 44.5″ (113 cm) Track Width: 38.3″ (97.3 cm) Weight (dry): 1,642 lbs (744.7 kg) Ground Clearance: 4.75″ (12.1 cm)
CERTIFICATION ANSI B71.4-2017. CE & EU machinery directives.
WARRANTY Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.
Technical Specifications
Brand
Toro
Model
ProCore® 648s Series Turf Aerator
Industry
Lawn Care
Type
Commercial Mower
ENGINE
Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross
Length
91.8” (231.3 cm
Width
50.12” (127.3 cm)

Similar Machines

Receive Latest News from SEMCO